Baader Planetarium

Baader 2 inch ClickLock Clamp M54 (Sky-Watcher)

• 2 inch Eyepiece Adapter

Baader 2 inch ClickLock Clamp 4.1"i UNF/24G (3.5" Feather Touch)

• 2 inch Eyepiece Adapter

Baader 2" / S52 Nose Piece

2" / S52 ultra hard nose piece with safety groove Focus side S52 dovetail ring Telescope side 2" barrel with 48mm filter thread...

Baader 2-inch ClickLock Clamp M48

2-inch Inner Connection (lens sided) : M48 For all parts of the M48 x 0.75 (foto) outer thread Optical tube length : 36.6 mm Inner Diameter /...

Baader M48/S52 Spacer Ring (f. MPCC III, Protective EOS T-Ring, ...)

This M48-spacer ring is necessary for connecting the Baader MPCC Mark III coma corrector at Baader Protective Canon EOS T-Ring Use the full...

Baader 2"/2" Inverter Ring with 48mm filter thread

Converts 2" female into 2" male thread Internal M48 Filter thread for 2" filter Specifications Outer thread :...

Baader 2" Locking Ring for NexStar

Allows direct connection of Baader 2" Zenith Prisms and mirrors to Schmidt-Cassegrain telescopes. For Celestron SCTs 8/9.25/11/14 with female 2"...

Baader DSLR-2" Filter Holder M48/SP54

Allows mounting of M48 (2") filters Needs Hyperion DT-rings BP#2958028 - 2458062 and additional Stepper Rings M67 up to M82 All...

Baader Changer Ring S52/M48

Changer / Inverter Ring S52/M48 for T-Rings / Adapters with S52 dovetail Can be used to combine T-Rings with S52 dovetail with accessories...

[M48] Baader Changer Ring M48/T-2

Changer / Inverter Ring M48 to T-2 for T-Rings / Adapters with M48 inner thread Can be used to combine T-Rings with M48 inner threads with...

Adjustable pin type face wrench Ø 2 mm

Tool for unmounting the M48 / T-2 insert-ring from the Baader Protective CANON T-Ring Scope of Delivery Adjustable pin type face wrench Ø 2...

Baader M43 extension 7.5 mm

M43/M43 extension (distance ring), suitable for Baader Morpheus, Hyperion and other eyepieces/adapters with M43 outer thread Optical length:...

Hyperion DT-Ring SP54/M43

For DT Adapter II & III and Hyperion Eyepieces The Hyperion DT-rings are optimized for the shortest distance between eyepiece lens and...

2" Universal flange - suitable for Solar Spectrum Filter

Drillings for SolarSpectrum H-alpha Solar filters and SolarSpectrum Telecompressor 2" (50.8 mm) inner thread Optical height : 6 mm...

Baader 2" SC Ultra Short T-Adapter for SC 5/6/8

T-2 (male) / 2" SC (female) Optical tube length : 7mm Inner Diameter / Clear Aperture : 39 mm Outer Diameter : 56 mm Inner...

[T-2 #18] Baader 3.3" Celestron Nut

3.3" thread for C11 and C14 For connecting the 2" eyepiece clamp no. BP#2408140 (T-2 component #17) to C11 and C14 telescopes A...

Baader M68 VariLock 15-20 mm extension

Baader M68 VariLock Extension 15 - 20 mm Continuosly (stepless) adaptable M68 extension with millimeter scale for fine-tuning of the optical...

Network Cable with ColdTemp-specified CAT-7 wire (5-/15-/30 m)

Available in 5, 15, 30 meters Network Cable (red) with ColdTemp-specified CAT-7 wire (CAT6a plug) Ideally suited for observatory...

Baader Morpheus® Adapter M43 / SP54

To connect Baader Hyperion DT Rings onto Morpheus eyepieces - not for Hyperion Zoom Mark III eyepieces Adapter for M43 internal thread SP54...

Solar Spectrum Research Grade 0.4x Telecompressor 2"

Alike the TZ-3 telecentric, also the RG 0.4x Telecompressor features 46mm clear aperture throughout, perfectly suitable even for large...

Solar Viewer AstroSolar® Silver/Gold

Solar Eclipse Glasses W A R N I N G Looking at or near the Sun will cause instant and irreversible damage to your eyes, including...

Baader Heavy-duty 8" Double Mounting Plate 570mm – for Optics up to 17" (100 kg)

8" (width 203 mm) heavy-duty dovetail bar 570 mm in total length, mounts onto heavy mounts such as 10Micron GM 3000 or GM 4000 allows dual...