T-2 System

3D T-2 Spacer Rings

More precisely manufactured 3D printing Diameter : 42 mm to 42.2 mm - real T-2 Heights : 0.6 mm - 0.8 mm - 1 mm - 1.2 mm - 1.4 mm - or as...

[T-2 #6] T-2(f) Quick Changer

Combines Zeiss Micro bajonett with T-2 female thread.

[T-2 #6a] TQC Heavy Duty T-2(f) QuickChanger

Baader TQC Heavy Duty T-2 QuickChanger Zeiss micro-bajonet, with brass-clamping Optical length 11mm For heavy accessories

[T-2 #7] Quick Change Ring T-2 (TCR)

Combines Zeiss Micro dovetail with T-2 male thread (for Part #6)

[T-2 #6 + #7] Complete T-2 Changer System

This complete T-2 Changer System is a combination of Part #6 and Part #7. Adapter #16 NOT included!

[T-2 #6a + #7] Complete TQC/TCR Heavy duty T-2 QuickChanging System

Heavy duty T-2 Quick Changer System BP#2456322, a combination of parts #6A und #7. This is a much improved product in Baaders Astro T-2-System...

[T-2 #9] Adapter M44(f)/T-2(f)

For Zeiss M44mm x 1

[T-2 #8c] Baader Ultrashort T-2 / 1¼" Clamp (20 mm)

Ultra short 1¼" eyepiece-clamp (w. brass locking ring) Optical length : 20 mm Optimized for guiding camera, w. three set...

[T-2 #12] TAK Adapter M43x0,75(m)/T-2(m)

For Takahashi with M43x0,75mm male thread
Optiacal length: 0,8mm!

[T-2 #13] Zeiss Cameraadapter M44(m)/T-2(m)

[T-2 #14] Nosepiece 1,25"/T-2(m)

Same as used by SBIG (> ST-5)

[T-2] Baader 1¼" / T-2 nosepiece with Safety Kerfs

Nosepiece with 28 mm insertion length, with Baader proprietory Safety Kerfs With only 3 mm long T-2 thread for modern CMOS cameras...

[T-2 #15] Reducer 2"(m)/1¼"(f)

Reducer 2" (male) to 1¼" (female) for eypieces or T-2 System. With T-2 thread at both sides and two clamp...

Hyperion T-Adapter M43/T-2 (M42x0.75)

Hyperion T-Adapter M43/T-2 (M42x0.75), to adapt standard DSLR T-Rings For Baader Hyperion, Baader Morpheus, PENTAX XW Eyepiece series...

[T-2 #15a] Newton Pushfix 2" to 1 1/4" Reducer

• For Newton Focuser

[T-2 #16] 2"(m)/T-2(m) Nose Piece and Camera adapter

Same as used by SBIG

[T-2 #18] Baader 3.3" Celestron Nut

3.3" thread for C11 and C14 For connecting the 2" eyepiece clamp no. BP#2408140 (T-2 component #17) to C11 and C14 telescopes A...

[T-2] Baader 2" / T-2 (M48) nosepiece with Safety Kerfs

Nosepiece with Baader proprietory Safety Kerfs grooves so that even the heaviest accessories cannot fall to the ground Equipped with only 3...

[T-2 #21] SC T-Photoadapter (BTA)

Baader SC-T-Adapter widefield version. 15 mm optical length. Fits all Schmidt-Cassegrain 2" threads of 5/6/8/11/14 OTAs.

[T-2 #19A] Baader 2" Safety Kerf nosepiece with 2" filter thread

ultra hard 2" nose piece, with Baader proprietory Safety Kerfs (introduced with the Morpheus and Hyperion Zoom Mark IV eyepieces: the...

[T-2 #22] M43(m)/T-2(m) "V"-Adapter - for Vixen

For old Vixen M43 thread

[T-2 #23] M42x1(f)/T-2(m) for MTO

M42x1(female) / T-2 (male)