Baader OTP II 19W Outdoor Telescope Power Switching Power Supply
Product.Nr.:
BP#2457615
EAN: 4047825045362
products condition: new
Manufacturer: Baader Planetarium
28,00 EUR
incl. 19 % VAT
-
Shipping within 24 hours
- delivery time : 3-5 days
- Output 12.8 V DC/ 1.5 Amp (19 Watt) from 100 V to 240 V AC
- Made for outdoor use at cold temperatures. Usable in temperatures from -25 °C up to 40 °C
- Interchangeable EU/US/UK wall plug included
- 2.5 m ( 8.25´) telescope cord
- Protective-disconnect ellbowed plug German design and quality with EU-wall plug, 5.5 mm / 2.1 mm
- Not waterproof IP40
Baader OTP Outdoor Telescope Power 19W
This power supply for outdoor use has been specially designed to meet the needs of amateur astronomers at northern latitudes. This 12.8 V/1.5 A fixed voltage power supply with reverse polarity protected protective-disconnect elbowed plug fits for example to all smaller Celestron mounts (Advanced GT, NexStar SE, NexStar SLT, LCM, CPC) and offers great advantages at a slightly higher price compared to normal indoor plug-in power supplies. It also fits all other common telescope mounts and devices with this power requirement and plug (tip positive/plus inside, plug diameter 5.5mm)
When used outside in the cold the voltage will reduce with temperature. Already at -10°C the remaining voltage output may have gone down to only 10.5 V. The motors of many telescope mounts will behave erratic at such low voltage. Especially the motor driver electronics then tries to replace the missing voltage by draining ever more Amps until both - power supply and mount electronics - will stall or become damaged. Many users then blame the mount and it´s messy electronics - instead of checking wether an inadaequate power supply may be the culprit.
The Outdoor-Telescope-Power II power supply unit therefore offers 1.5 A/12V DC voltage all accross the AC voltage range from 100 to 240 volt that is common worldwide. Even at extreme cold temperatures, the voltage cannot drop so low that the electronic components or the motors of a telescope mount would suffer damage.
With 1.5 Amp/19 Watt continuous output, there is sufficient power reserve even at full load, even with heavy instrument loads on the mount and large load changes. In addition to the increased outdoor voltage, the working temperature has been designed for -25° to +40° .
The connecting cord between the power supply unit and the elboews plug measures 2.5 m in length, so that the power supply unit will not become a trip-hazard and can be conveniently placed near the floor. The elbowed plug does protect the power cable from accidental breakage and especially the telescope power input socket from damage when actually someone would trip over the cable. When accidentally the cable gets tightened, the connecting ellbowed plug will release the cable straight, without ripping or damaging the power socket affixed in the telescope.
The housing is encapsulated against moisture. Ideal for the travelling amateur astronomer!
Technical Data
- Type : Charger
- Power Input (Volt) : 100 V – 240 V
- Power Output (Volt) : 12.8 V DC
- Power Output (Ampere) : 1.5 A
- Power Output (Watt): 19 W
- Temperatures : -25 °C up to 40 °C
- Cable length : 2.5 m
- Weight : 0.22 kg
Scope of Delivery
- Baader OTP II 19W Outdoor Telescope Power Switching Power Supply
- Interchangeable EU/US/UK wall plug
Last viewed
Baader OTP II 19W Outdoor Telescope Power Switching Power Supply
- Output 12.8 V DC/ 1.5 A (19 Watt)
- Temperatures from -25 °C up to 40 °C
- 2.5 m ( 8.25´) telescope...
28,00 EUR
incl. 19 % VAT excl. shipping costs
Shipping within 24 hours
delivery time : 3-5 days
Astrozap Dew Heater Ø 2" (up to 80mm)
- Dew Heater - 2 Inch
- For Eyepiece and 80mm optics
- This product requires the use of a simple D/C adapter (#AZ-719) or dual...
94,00 EUR
incl. 19 % VAT excl. shipping costs
Shipping within 24 hours
delivery time : 2-3 days
Baader 3"/EQ Dual Dove Tail Clamp 230mm length, two pressure clamps
- Baader 3" + Vixen Dove Tail Clamp 230mm length
- Aluminum
- With two pressure clamps
...
260,00 EUR
incl. 19 % VAT excl. shipping costs
Shipping within 24 hours
delivery time : 3-5 days
Baader 3" Focuser Hyperion for Refractor 130mm travel
3" Focuser Hyperion for Refractor 130mm travel - long delivery time!
775,00 EUR
incl. 19 % VAT excl. shipping costs
replenishment order
Baader Modular Guide Scope Rings
Three sizes are available
- BP I = 60-120mm
- BP II = 110-160mm
- BP III =...
from 143,00 EUR
incl. 19 % VAT excl. shipping costs
Shipping within 24 hours
Astrozap Dew Heater Ø 4" (115-135mm)
- Dew Heater - 4 Inch
- 115-135mm
- This product requires the use of a simple D/C adapter (#AZ-719) or dual channel controller...
105,00 EUR
incl. 19 % VAT excl. shipping costs
Shipping within 24 hours
delivery time : 2-3 days
Manufacturer identification
Manufacturer identification
Name: BAADER PLANETARIUM GmbHE-Mail adress: kontakt@baader-planetarium.de
Streetaddress: Zur Sternwarte 4
ZIP Code: 82291
City: Mammendorf
Country: DE
Phone: +49 (0) 8145 - 8089-0
