Baader Off Axis Guider for Baader FlipMirror II (BFM-OAG)

Baader Off Axis Guider for Baader FlipMirror II (BFM-OAG)

Name: Baader Off Axis Guider for Baader FlipMirror II (BFM-OAG)
Brand: Baader Planetarium
SKU: BP#2956951
Price: 122 EUR

Product.Nr.: BP#2956951

Manufacturer: Baader Planetarium

122,00 EUR
incl. 19 % VAT

excl. shipping costs

Gewöhnlich versandfertig in 24 Stunden
delivery time : 3-5 Tage

products condition NewCondition

Seen cheaper?

There are no reviews for this product

product description

Off Axis Guider (BFM-OAG) for direct connection to the Baader FlipMirror II Star Diagonal
This is the only prism that can be tuned to actively center a star on the guiding chip.
Use the BFM-OAG to attach an autoguider camera to a Baader FlipMirror II Mirror Diagonal that works with every position of the mirror.
With one or two Baader DT-4 nosepiece extensions you can place virtually any camera above the Off-Axis-Guider so that it is parfocal with the recording camera.
The BFM-OAG is also part of the Baader Off Axis Guider for RCC (RCC-OAG)
Requires 24mm back focus on BFM II

This Off-Axis-Guider is made for the Baader FlipMirror II (BFM II) Mirror Diagonal. It connects to the bottom port of the BFM II (19 mm nosepiece) and sends light through a pickup-prism to an autoguider camera, independent of the position of the mirror. To attach the Off-Axis-Guider instead to a telescope without BFM II, you need the Off Axis Guider for RCC (RCC-OAG) with T-2-threads.

You can attach the Off-Axis-Guider for Baader FlipMirror II (BFM-OAG) directly to the Baader FlipMirror II Mirror Diagonal. You only have to remove the small spacer ring which is included, so that the prism is fully inserted into the light path of the BFM II.

Please note: this is the only prism that can be tuned to actively center a star on the guiding chip. The vertical side of the prism must face the telescope.

The BFM-OAG is also part of the Off Axis Guider for RCC (RCC-OAG). To use this item with the BFM II, you need to remove the unit with the pick-up prism from the T-2-ring and the spacer ring from the pick-up prism exactly as with the Off-Axis-Guider for BFM II.

The prism is always below the mirror so that it can also be used when the mirror is down, e.g. to guide a planetary camera connected to the upper port. When the mirror is up, the camera at the rear port should be aligned in such a way that the prism is under the long side of the sensor.

You have several options to set the guiding camera to the same focus plane as the cameras/eyepieces which are connected to main light path of the FlipMirror. You can use the usual combinations of T-2 or M48 extensions tubes to change the position of camera/eyepieces. If you need to bring the autoguider further away from the BFM II, you can extend the 1¼" nosepiece of your autoguider with one or two Baader DT-4-nosepiece extensions and lock the position with the Baader Focusing Ring Collar FR-4.

If you are using an Off-Axis Guider, you must also consider the focus position of the guiding camera. If you use the Off-Axis-Guider for Baader FlipMirror II as well as a guiding camera whose image plane is at the upper end of the Off-Axis-Guider (i.e. without additional back focus), the image plane of the camera and eyepiece is about 24 mm behind the two T-2 threads of the BFM II. A CCD camera with a short back focus, for example, can be adjusted to this distance with a Baader VariLock 29, as can the Baader Polaris I crosshair eyepiece when connected directly to the VariLock 29 via T-2. Thus, a very short adaptation is possible.

If you use a DSLR via a T-2 adapter, or an eyepiece clamp for the eyepiece, you need more back focus. Then, the guiding camera must be placed at a greater distance from the BFM II. The easiest way to do this is to use the DT-4 nosepiece extension with an overall length of 18.5 mm. It has the diameter of 1¼" eyepieces and is screwed into the 1¼" filter thread of the guiding camera. With one or two of these extensions, you can place virtually any camera over the off-axis guide so that it is parfocal with the recording camera.

Technical Data

Optical length : 43 mm + 3.5 mm Extension tube
(requires 24mm Back focus on BFM II)
Prisms Width : 9.5 mm
Clamp : 1¼"

Scope of Delivery