PrimaLuceLab ESATTO 3" – Robotic Focuser up to 8 kg
Product.Nr.:
PL#773076
EAN: 8059020773076
products condition: new
Manufacturer: PrimaLuceLab S.p.A.
945,00 EUR
incl. 19 % VAT
- Robotic 3" focuser with 76.3 mm clear aperture – for large sensors, reducers and correctors
- Carries up to 8 kg without flexure: Crayford mechanism with 28 ball bearings
- Precise: 0.04 µm per step, 25 mm travel
- Interfaces: USB-C, Wi-Fi, ASCOM compatible, PLAY software
- Ports for the ARCO camera rotator and a temperature probe
- For large apochromats, Ritchey-Chrétien and Cassegrain telescopes – made in Italy
PrimaLuceLab ESATTO 3" – for large telescopes and heavy imaging trains
The ESATTO 3" is the robotic focuser for demanding astrophotography with large telescopes. With 76.3 mm clear aperture it offers much more room than the 2" version (51 mm) – enough for large camera sensors and special reducers and correctors. It replaces your telescope's focuser and focuses extremely precisely under computer control, fully automatically too via autofocus. Motor and controller are built in, so no separate control box is needed.
Typical applications are large apochromatic refractors, Ritchey-Chrétien and Cassegrain telescopes, and heavy imaging trains with off-axis guider, filter wheel or adaptive optics.
High load capacity without flexure
The Crayford mechanism with 28 ball bearings is designed for heavy loads and carries up to 8 kg without flexing. Camera and sensor stay precisely aligned – for round stars right into the corners. With 0.04 µm per step and 25 mm of travel, the ESATTO 3" hits focus exactly even with fast optics.
Interfaces and software
- USB-C: connects to any Windows computer or the PrimaLuceLab EAGLE mini PCs; the supplied cable fits any USB port.
- Wi-Fi: control from a smartphone, tablet or computer with the Virtual HandPad app – handy for visual observing too.
- ASCOM compatible: controllable with any ASCOM-capable imaging software; the ASCOM driver can be downloaded from the manufacturer's website.
- PLAY software: PrimaLuceLab's astrophotography software
- Temperature probe port for automatic refocusing as the temperature changes
- ARCO port: the ARCO 3" camera rotator connects directly with a short cable – no extra USB or 12 V cables.
- 12 V: additional power port
Good to know
- Suitable adapters are required to connect telescope and camera and are not included. On the telescope side there are adapters for Takahashi FSQ85, TSA 120 and Takahashi with M72 thread, GSO/Orion/TPO Ritchey-Chrétien 10" to 16", Borg 90FL and 107FL, Sky-Watcher Esprit 100 ED, 120 ED and 150 ED and Meade 16", among others. On the camera side the ESATTO 3" has an M81×1 male thread, with adapters to T2, M48, M54, M57, M65, M68 and M72, a 2" visual back and a 25 mm extension. Suitable adapters are available separately in our shop under ESATTO adapters – we are happy to help you choose.
- Mind the optical length: the ESATTO 3" takes up 58 mm (77 mm including the internal flange), and adapters add to this. Check that your optics have enough backfocus.
- A temperature probe and the ARCO 3" camera rotator are optional and not included.
- At 1345 g, the ESATTO 3" is intended for sturdy, larger telescopes. For smaller refractors, the ESATTO 2" is the right choice.
Technical data
| Model | PrimaLuceLab ESATTO 3" Robotic Microfocuser |
| Article number | PLLEST3-B |
| Type | Robotic Crayford focuser with built-in motor, controller and Wi-Fi |
| Clear aperture | 76.3 mm |
| Optical length | 58 mm (77 mm including internal flange) |
| Travel | 25 mm |
| Resolution | 0.04 µm per step |
| Mechanism | Crayford with 28 ball bearings |
| Load capacity | 8 kg |
| Camera side | M81×1 male thread (adapters sold separately) |
| Ports | USB-C, 12 V, temperature probe, ARCO port |
| Interfaces/software | Wi-Fi (Virtual HandPad), ASCOM compatible (driver as download), PrimaLuceLab PLAY software, EAGLE mini PCs |
| Weight | 1345 g |
| Origin | Made in Italy |
Scope of delivery
- PrimaLuceLab ESATTO 3" Robotic Microfocuser
- USB-C cable
Telescope and camera adapters, temperature probe and ARCO are not included.
Manufacturer identification
Manufacturer identification
Name: PrimaLuceLab S.p.A.E-Mail adress: support@primalucelab.com
Streetaddress: Via Torricelli 9
ZIP Code: 33080
City: Porcia (PN)
Country: IT